Osmo Polyx Oil 2K has been designed for the flooring professional. It is very durable and is resistant to water and dirt. Two coats can be applied in one day in a wet-on wet application. The finish dries and cures in 4 hours.
Coverage is 30-40 square meters
APPLICATION MECHANICALLY WITH A FLOOR BUFFER
Apply two thin coats with an Osmo FloorxCenter® or single disc floor-buffing machine, with green and white pads.
Preparation: Osmo Polyx®-Oil 2K Pure is not ready to use.
Please mix the contents of the hardener (Component B) into the Polyx-Oil (Component A).
Pay careful attention to ensuring the two components are well mixed
Can-life (Open-time) of the mixed product is approx. 4 hours
Product is now ready for use
First Coat: Apply one thin coat with an Osmo Double Sided Scraper, Professional Scraper or other high quality trowel, and Osmo FloorxCenter® or floor-buffing machine.
Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar.
Wait approx. 30-60 minutes, until the Polyx®-Oil 2K Pure has penetrated the wood surface
Massage the product into the surface using a floor buffer and a green pad.
Proceed immediately to second coat
Second Coat: Immediately after the first coat of Polyx®-Oil 2K Pure, apply a second thin coat with a trowel and floor buffing machine.
Trowel the second coat product thinly and evenly onto the floor.
Allow approx. 35-60 minutes for product to penetrate wood surface
Disperse and polish the floor, removing excess using a floor buffer and white pads
There is too much material on the surface when you can see rings. If so, turn the pad over.
Allow 4 hours drying time. Allow for good ventilation whilst drying
If using Polyx®-Oil 2K Pure 6125 as a top coat over Polyx® Professional Colour Oils, proceed immediately to second-coat. Only one coat of Polyx®-Oil is required over top of a Polyx® Professional Colour Oil, therefore the first coat and its steps are omitted.